Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

Rifleman

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking skills

Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing. She is built of plywood and is intended for 15/20 hp outboard motors.

Caledonia Yawl II

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction: Glued lapstrake plywood.

Alternative construction: Traditional plank, cold molded and strip plank.

No Lofting required.

Plans include 10 sheets.

This is the 7 plank per side, which some folks will feel is...

ROBERTS SPRAY 55

Designer: 
Bruce Roberts-Goodson
Skill Level to Build: 

Spray 55 - STEEL PLANS & FRAME PATTERNS Many examples of this design can be found cruising in various parts of the world. Specially designed for Multi Chine Steel Construction.

FireBug

Designer: 
John Spencer/Peter Tait
Skill Level to Build: 
Beginner/any level

The FireBug is a small sailboat or yacht that you can amateur build at home, sailing club or school, then learn to sail. It's easy to sail and will be the fastest boat on the bay. Low cost too!

Alden 21' Indian Class

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.

Almaguin 400

Designer: 
Matthew Marsh
Skill Level to Build: 
Beginner to intermediate

A versatile 4-metre open utility / runabout for river and inland lake use, built in taped-seam plywood.

ATHEY

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athey is a 15' open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 4, 6 and 9mm glued lapstrake plywood, she weighs just 65 pounds and is cartopped.

Design No. 165

Designer: 
George Whisstock
Skill Level to Build: 
Some experience preferable – CNC version needs less experience than laminated version

A development from our very successful and popular Design No. 119 (17′6″ Pocket Cruiser) – a 19′4″ Pocket Cruiser in two basic versions:

Saloon version: good sitting headroom.

Doghouse version: decent standing headroom in the...