Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Skerrieskiff 15'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...

owe 25

Designer: 
Francesco Belvisi
Skill Level to Build: 
medium

Owe 25 is an high performance sport boat.

The lower part of the hull is made from strip planking, the other parts are made from plywood and wood sandwich.

A boat simple and stiff, available in boat kit.

We can provide vpp...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

32' MYSTIC Sharpie Ketch

Designer: 
Edward S. Brewer
Skill Level to Build: 
Intermediate

This 32′ double-ended sharpie ketch will provide the amateur builder with a shoal-draft cruising boat of simple construction.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 4 sheets....

Bowler

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate

Thank you for considering my plans for BOWLER, a “cruising” version of my TOP HAT launch. These boats are descended from Harry Bryan’s inspired Handy Billy design, which in turn can trace it’s origins back to William Hand's vee bottom designs...