Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

853 results for All Boat Plans & Kits

ROBERTS 281

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

ROBERTS 281 Canoe Stern - Fiberglass

For those of you that are looking for the sea going qualities of a canoe stern then this is the design for you.

VOYAGER DS 655

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

VOYAGER DS 655 WOOD / EPOXY, Fiberglass or Steel.

The cockpit extends from inside the 'dog house' with 5 ft sitting headroom though to near the transom as shown. Engine is under the dog house.

Floom, RYD-29.6

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced because of size

Floom (RYD-29.6) is one in a series of river/houseboat designs. This version is available in two widths, 7' and 9'. The V bottom hull propels very easily, doesn't slap and is quite stable.

SCHEGGIA

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

SCHEGGIA (designed to compete in 10 Foot Class – www.diecipiedi.it) is narrow at waterline which makes it fast. Thanks to its flare sides stability increases considerably when the boat starts to hee

DIAPASON 750

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

DIAPASON is a small cabin cruiser 7,50 m length. It is a modern, simple boat with racy lines, good performances and internal accommodations suitable for cruising.

24' 6" Sloop, TYPHOON

Designer: 
Winthrop Warner
Skill Level to Build: 
Advanced

A roomy auxiliary sloop in a small package.
Construction: Carvel planked over steamed frames.
Alternative construction: Cold-molded or strip.
Lofting is required.
Plans include 11 sheets.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

16' Gentleman's Runabout

Designer: 
Nelson Zimmer & John Hacker
Skill Level to Build: 
Advanced

A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.

Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.

Please note:...