Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Volare Console

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

‘Volare’ comes in two versions. This is the console version, the utility version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.

Her length is that of two sheets of 8′ plywood and she’s built in two halves (...

Holly Point Skiff

Designer: 
Al Picardi
Skill Level to Build: 
entry

FREE plans — Holly Point Skiff, aka Holly Point Open Fisherman.

It’s time we got back to the fuel efficient hull forms, and here’s one that will give the thrill of planing speeds, with the economy of a skiff. It is a large, lightweight...

32' MYSTIC Sharpie Ketch

Designer: 
Edward S. Brewer
Skill Level to Build: 
Intermediate

This 32′ double-ended sharpie ketch will provide the amateur builder with a shoal-draft cruising boat of simple construction.

Construction: Plywood planking over sawn frames.

Lofting is required.

Plans include 4 sheets....

COASTWORKER 25

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Coastworker 25 Plans and patterns available for building in either Steel, Aluminum, Fiberglass or Wood Epoxy

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

Yankee Tender

Designer: 
WoodenBoat
Skill Level to Build: 
Basic

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.