Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

NAIADE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

NAIADE is a little bit shorter than classical sea kayaks but it is perfectly suitable for pleasure trips in calm waters, under safe conditions, even for amateur paddlers.

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...

Goeller 12' Dinghy

Designer: 
Frederick Goeller
Skill Level to Build: 
Intermediate

Round-bottomed, transom stern, centerboard, 2-4 daysailing.

Contruction: Carvel planked over steamed frames

Alternative contruction: Lapstrake, strip or cold-molded

Lofting is required

Plans include 3 sheets

AC 75 Evolution

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The AC 75 Evolution design input was to crate a trailerable boat with a small displacement, building with traditional materials such as wood. Another request was to have a comfort and an interior volume typical of larger size boats. We have...

ROBERTS 345

Designer: 
BRUCE ROBERTS-GOODSON

Roberts 345 - MC steel or aluminum, R/C Steel, Fiberglass, Wood Epoxy Originally this was designed for lightweight frameless multi-chine steel construction and met with such success that, due to dem

Almaguin 500

Designer: 
Matthew Marsh
Skill Level to Build: 
Beginner to Intermediate

A versatile, 5-metre utility runabout for cottagers, anglers and day trippers, ideal for the first-time builder.

Cooper Jr. - RYD-22.11

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced, because of size

Copper Jr. is a extended cabin V bottom power cruiser. Her general qualities permit very economical cruising in comfort with modest power requirements. Taped seam, plywood construction.

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

K-48

Designer: 
Paul Kotzebue
Skill Level to Build: 
Advanced

48 ft Daysailer based on the 40 Square Meter class.