Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

ZEN

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

ZEN is a very simple 10 Foot boat (www.diecipiedi.it) particularly narrow and therefore unstable. It is not the right boat for a beginner but, in the hands of a good helmsman, it may be fast.

Kiska

Designer: 
Orca Canoes & Kayaks Ltd.
Skill Level to Build: 
novice

Kiska is a wood strip/epoxy single kayak. Based on Greenland kayak lines, this low volume kayak is playful but tracks well

16' 6" Resolute

Designer: 
Steve Killing
Skill Level to Build: 
novice

Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Navcat Camper

Designer: 
NAVICULUS
Skill Level to Build: 
medium

Naviculus has teamed up with well known Australian Camper supplier Trayon to provide the camping experience on a boat. The boat is a simple open deck catamaran of wooden construction and with Torqeedo electric propulsion. The trayon camper can...

Joansa

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking

Light plywood lapstrake sports rowing boat, can carry a small outboard motor, quick and easy build. Built in bouyancy tanks.

Sampan 36 Houseboat

Designer: 
Reuel B. Parker
Skill Level to Build: 
Low

The SAMPAN 36 HOUSEBOAT is a simple, pragmatic floating home suitable for a couple with a child. It is self-contained and intended for use in a marina or at anchor. It may employ an outboard motor, or simply be towed to a semi-permanent mooring...

Stickleback Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic

Construction: Glued lapstrake plywood. Alternative construction: Traditional planking, cold molded, strip plank, epoxy-fiberglass. No Lofting required. Plans include 5 sheets.

Daysailer 24'

Designer: 
Paolo Lodigiani and Matteo Costa

If we have to base ourselves on market demand before 2008, the two daysailers that we propose are very small. At that time, generally characterized by a continuous increase in boat size, it seemed as though a daysailer could not be less than 12 m...