Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Design No. 165

Designer: 
George Whisstock
Skill Level to Build: 
Some experience preferable – CNC version needs less experience than laminated version

A development from our very successful and popular Design No. 119 (17′6″ Pocket Cruiser) – a 19′4″ Pocket Cruiser in two basic versions:

Saloon version: good sitting headroom.

Doghouse version: decent standing headroom in the...

22'4" Dragonfly

Designer: 
Skill Level to Build: 
some experience required

The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.

14' 10" Runabout, RASCAL

Designer: 
Ken Bassett
Skill Level to Build: 
Intermediate to Advanced

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

Linnet

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The LINNET is a seaworthy rowing boat that has been specifically designed for sea use. Accordingly it does not have outriggers or a sliding seat while a small daggerboard is fitted to help prevent being blown sideways by the wind. A good load...

Kahuna

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

32' Bermudan or gaff-rigged cutter for construction in wood and epoxy

ROBERTS 64

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 64 - Steel or Aluminum or Fiberglass

This design was originally based on the very successful Roberts 53 and is assured of acceptance by those builders who require a larger boat.