Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Silver 333

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing. The bow of the boat acts as...

Scherzando

Designer: 
Bosco Plana

Scherzando is a 12'10'' open canoe. The construction technique is a wooden basquet whith a canvas skin coated with epoxy or polyester. The plans include 7 station moulds, bow and stem at full escale.

NAVCAT RIVER FERRY

Designer: 
Naviculus
Skill Level to Build: 
medium

A small river ferry has been designed to transfer up to 60 passengers.

The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.

The design is using the torqeedo electric motor concept...

28' Canoe Yawl, Rozinante

Designer: 
L.F. Herreshoff / Modifications by Doug Hylan
Skill Level to Build: 
Advanced

This hypnotically striking canoe yawl ranks among the most admired designs of our time.

Construction: Carvel-planked over steam-bent frames

Alternative construction: Cold-molded

Lofting is required

Plans include 9...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

CURLEW

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Basic

26′ Auxiliary Ketch

Based on a traditional fishing vessel type called a “Cowhorn” this design features an inboard engine and ballast keel.

The arrangement provides two berths, a head and modest galley. The divided cockpit...

14' 10" Runabout, RASCAL

Designer: 
Ken Bassett
Skill Level to Build: 
Intermediate to Advanced

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

ROBERTS 532

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 532 / VOYAGER 542 Radius chine STEEL or Fiberglass plans & frame patterns

The Roberts 532 is the build from scratch version ... the Voyager 542 is the kit version