Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Pulsar 50

Designer: 
Erik Lerouge
Skill Level to Build: 
High

With outstanding performance, a cruising-racing trimaran provides a fabulous sailing program:
Besides the possibility of racing, speed extends her range and distant cruise grounds may be reached during our too short holidays.

Pulsar...

Bowler

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate

Thank you for considering my plans for BOWLER, a “cruising” version of my TOP HAT launch. These boats are descended from Harry Bryan’s inspired Handy Billy design, which in turn can trace it’s origins back to William Hand's vee bottom designs...

Beach Pea

Designer: 
Doug Hylan
Skill Level to Build: 
beginner to intermediate

Seaworthy, stable, and easily rowed. Here is a pod that is a bit smaller than most, but she will still carry a big load and bring you through some lumpy water with confidence.

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using...

Mist

Designer: 
Karl Stambaugh
Skill Level to Build: 
Intermediate to Advanced

This cozy pocket cruiser combines simple sheet-plywood construction with more than a touch of elegance.

Her board-up draft of 1′6″ lets you explore secluded coves and is easy to haul with a trailer.

Construction: Plywood planking...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

12' Catspaw Dinghy

Designer: 
Joel White and N.G. Herreshoff
Skill Level to Build: 
Intermediate

An open boat that rows with ease and swiftness and is stiff enough under sail to stand up to a breeze.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake or strip

No lofting is required...

PIXIE, Beach Catamaran

Designer: 
Richard & Lilian Woods
Skill Level to Build: 
Basic

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.