Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using...

ROBERTS 19

Designer: 
Bruce Roberts-Goodson
Skill Level to Build: 
AVERAGE SKILLS

Roberts 19 Trailerable gunkholing and coastal cruiser. Plans and full size frame patterns available for wood epoxy construction.

Papoose

Designer: 
Warren Jordan
Skill Level to Build: 
Beginner

This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length....

65 ft Trawler

Designer: 
R.C.Johnston
Skill Level to Build: 
Professional

This is a well tested design for long range ocean passages. It has a heavy steel hull and aluminum superstructure. Propulsion is by twin Cat engines driving open props protected by heavy skegs.