Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Malabar II

Designer: 
John Alden
Skill Level to Build: 
advanced

An oceangoing auxiliary cruiser featuring stout but simple carvel construction.

Construction: Carvel planked over steamed frames

Lofting is required

Plans include 5 sheets.

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

EURO 1200

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS.

EURO 1200 - Aft Cockpit version STEEL KIT or PLANS & CUTTING FILES or FIBERGLASS or WOOD EPOXY PLANS & FSP Based on the Waverunner 38....Hundreds already built.

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

18' 8" Mackinaw

Designer: 
Nelson Zimmer
Skill Level to Build: 
Intermediate to Advanced

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

...

NAVCAT CANAL

Designer: 
Naviculus
Skill Level to Build: 
medium

A series of Catamaran Houseboats/canal boats has been designed with electric propulsion.

The boats have been designed to meet dimensional restrictions of the french canal waterways, however the design can be easily adapted to other inland...

ROBIN

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Basic

10′ x 3′8″ Double Ender Dinghy.

Designed for paddling, rowing or sailing and for construction in laminated wood or fiberglass.

Able to carry on car top as canoe or on boat deck as yacht tender.

Seats three and has two...

Seagull

Designer: 
John Welsford
Skill Level to Build: 
Very simple

Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!

16' 6" Resolute

Designer: 
Steve Killing
Skill Level to Build: 
novice

Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.