Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

Whilly Tern

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Construction - Glued lapstrake clinker plywood.

No Lofting required.

Plans include 5 sheets with instructions.

Sail Area - Lug 83 sq. ft.

Sloop 95 sq. ft.

TRAWLER YACHT 43 KIT

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Trawler Yacht 43 STEEL KIT or PLANS & CUTTING FILES Trawler Yacht 470 FIBERGLASS PLANS & FSP

These trawlers are designed in accordance with Lloyds for category 1 (unrestricted operating /

Silver 333

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing. The bow of the boat acts as...

Volare Utility

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.

Her length is that of two sheets of 8′ plywood and she’s built in two halves (...

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Pilot Schooner 28

L.O.A.:  29′ ½″

L.B.P.:  28′ 10 ½″

L.O.D.:  27′ 9″

L.W.L.:  25′ 3 ½″

BEAM:  9′ 4″

DRAFT:  3′ 10″

SAIL AREA :  413 sq. ft.

DISP.:  9,500lbs. (approximate, for...

Sea Island Sport

Designer: 
Nick Schade
Skill Level to Build: 
Beginner/Intermediate

The Sea Island Sport is CLC’s response to hundreds of requests for an attractive stitch-and-glue sit-on-top kayak. Credit for the design goes to Nick Schade.

Zipper

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.

This design differs from those of the period in that it is to be constructed in the 'Instant Boat'...