Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Bounty - Row Boat/Tender

Designer: 
Mark Evans
Skill Level to Build: 
Beginner

A practical, strong, easy-to-build rowing dinghy or yacht tender and an ideal first-time boat building project. Build your own boat with our 45 page, photo illustrated instruction manual. Bounty is the ideal choice where a small lightweight,...

Spike Skiff 12' 3"

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Please note: this design was formerly known as Pike.

Construction - Glue-lap-plywood flat bottom.

Alternative construction - Traditional plank.

No Lofting required.

Plans include 3 sheets with instructions.

Sail...

Half Model Plan PAPOOSE

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.

The plans produce a model that is 22″ long.

You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and...

Virginia Park

Designer: 
Reff Reinhart
Skill Level to Build: 
Intermediate

Virginia Park is an elegant lapstrake launch. Featured in WoodenBoat #234, Sept. – Oct. 2013, Virginia Park is built in the glued lapstrake method with steam bent frames. It features a short forward deck, aft deck with splash well for the...

MULTI 5

Designer: 
ACDesign
Skill Level to Build: 
beginner

The Multi 5 is a multihull with a simple construction and good performance. The construction is extremely simplified by the drift absence. The good hulls volume allows to spend pleasant days and moving along the coasts with other friends, having...

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been...

32' Lobstercruiser

Designer: 
Alan McInnis
Skill Level to Build: 
Advanced

Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip or cold-molded

Lofting is required.

Plans include...

Janus sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
beginner

Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good...

Lynx

Designer: 
Mike Camp
Skill Level to Build: 
advanced

The 24-foot Lynx was designed as the smallest boat with which a couple could contemplate an ocean voyage. The hull is a multi-chine hull to make it easy to build in flat plate steel. There are two chines. The sheer shows a strong spring and it...