Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of WOOD hull material. And if you’re in the market for a boat to build, this is a fine place to start.

To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.

 

700 results for All Boat Plans & Kits

Old Gaffer

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Moderate

18′ double ended, auxiliary daysailer. Gaff rigged sloop with large cockpit and small cudy forward. Traditional carvel construction with outboard rudder and ballast keel. Many boat built to this design over the years including some by amateur...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

Shellback Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

Sassafras 12

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

An ultralight solo pack canoe weighing in at 26 lbs. Carry the boat in one hand, your paddle in the other.

28' Canoe Yawl, Rozinante

Designer: 
L.F. Herreshoff / Modifications by Doug Hylan
Skill Level to Build: 
Advanced

This hypnotically striking canoe yawl ranks among the most admired designs of our time.

Construction: Carvel-planked over steam-bent frames

Alternative construction: Cold-molded

Lofting is required

Plans include 9...

13' 9" Willy Winship

Designer: 
John Atkin
Skill Level to Build: 
Basic to Intermediate

Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.

Construction: Cross-planked bottom, lapstrake sides

Alternative constuction: Plywood, glued lapstrake plywood

Lofting is required

...

Noank Pulling Boat

Designer: 
Nick Schade
Skill Level to Build: 
Intermediate

The Noank Pulling Boat is an 18′ x 36″ [5.5m x 91cm] sliding seat rowing boat suitable for open water travel. It has two large floatation chambers that can store a massive amount of gear if you should wish to go for an expedition.

This...