Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of WOOD hull material. And if you’re in the market for a boat to build, this is a fine place to start.

To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.

 

696 results for All Boat Plans & Kits

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

Abaco 23

Designer: 
Jacques Mertens
Skill Level to Build: 
experience

Classic sport fishing boat in the style of the Abaco boats. A classic, smooth riding, variable deadrise hull finishing with 17 degrees deadrise at the transom.

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

Virginia Park

Designer: 
Reff Reinhart
Skill Level to Build: 
Intermediate

Virginia Park is an elegant lapstrake launch. Featured in WoodenBoat #234, Sept. – Oct. 2013, Virginia Park is built in the glued lapstrake method with steam bent frames. It features a short forward deck, aft deck with splash well for the...

Puget Sound Cruiser

Designer: 
Colin Wood
Skill Level to Build: 
Simple construction, moderate build time.

Originally designed for WoodenBoat Magazine’s Design Competition II, Puget Sound Cruiser is an efficient, rugged, comfortable cruiser that can sleep two comfortably, or four in a pinch.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...