Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

20' Spalding Utility Launch

Designer: 
Eliot Spalding
Skill Level to Build: 
Intermediate to Advanced

Rugged little launch with generous beam.

Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.

Construction: Strip-planked over steam-bent frames...

18' 6" Redwing

Designer: 
Karl Stambaugh
Skill Level to Build: 
Intermediate

Redwing- a gentle, shoal-draft, low-powered
(5 to 10-hp), sheet-plywood outboard cruiser - can live on her trailer.

Whenever you wish, she'll be ready to go exploring.

Construction: Plywood planking over sawn frames, OR...

Jericho Bay Lobster Skiff

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Designed by Joel White, the original boat was built plank-on-frame by Jimmy Steele (of Peapod fame), but no plans were ever drawn-until now.

Tom Hill and Eric Dow have taken lines off the original boat and Tom built the prototype and has...

20' 3" Flatfish Class Sloop

Designer: 
Joel White
Skill Level to Build: 
Advanced

A handsome daysailer based on the Herreshoff Fish Class, but with a centerboard conversion similar to that of the Haven 12 1/2.

Construction: Carvel planked over steam-bent frames.

Lofting is required.

Plans include 6 sheets...

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class.

The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup.
As the down-scaling would leave the boat with to little righting moment...

ETTA MAY

Designer: 
Peterson Associates, Inc.
Skill Level to Build: 
moderate

Auxiliary cruising sloop evolving from the Hudson River and Friendship sloops.

Excellent for single handling with 450 sq. ft. of working sails, open decks and large cockpit.

Arrangement includes two berths with optional pipe berths...

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...

Riva Scoiattolo

Designer: 
Classic Wooden boat Plans-Riva 1953 original paper plans

At 14 feet this is Riva’s only outboard powered design. Originally designed in the 1950s, only some 150 were ever produced. A very rare outboard with limited images of original examples anywhere.

The Scoiattolo is complete with flooring...