Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Sea Bright 36

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

SEA BRIGHT 36

L.B.P.: 36′

BEAM: 10′ 11″

DRAFT: 1′ 8″/4′ 7″

DISPLACEMENT: 9,500 lbs

BALLAST: 3,483 lbs, 2,000 lbs lead foil laminated in keel; 250 lbs trim; 633 lbs water; 600 lbs fuel

WATER: 75...

Bowler

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate

Thank you for considering my plans for BOWLER, a “cruising” version of my TOP HAT launch. These boats are descended from Harry Bryan’s inspired Handy Billy design, which in turn can trace it’s origins back to William Hand's vee bottom designs...

Merry Wherry

Designer: 
Ron Mueller
Skill Level to Build: 
Beginner

The Merry Wherry is a friendly choice for recreational rowing. 15ft single rower. There’s not another boat like it- a fifteen year heritage of continual refinement. She's stable and friendly to all rowers new and ol

Scherzando

Designer: 
Bosco Plana

Scherzando is a 12'10'' open canoe. The construction technique is a wooden basquet whith a canvas skin coated with epoxy or polyester. The plans include 7 station moulds, bow and stem at full escale.

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.