Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

CAPRICE

Designer: 
Daniel Skira
Skill Level to Build: 
Medium

Caprice is a Mini Offshore Cruiser for two.

Built with double sawn frames and strip plank, this little gaff cutter is designed for long term cruising.

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...

ROBERTS SPRAY 38

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

Spray 38 - STEEL PLANS & FRAME PATTERNS Over 100 examples of this design can be found cruising in various parts of the world. Specially designed for Multi Chine Steel Construction only this Spray

Hanze Yawl

Designer: 
Bert van Baar/Pepijn van Schaick
Skill Level to Build: 
intermediate

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.

Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the...

25' Keel/Centerboard Sloop

Designer: 
John Alden
Skill Level to Build: 
Advanced

A fast and able auxiliary cruiser with wheel steering and accommodations for three.

Construction: Carvel Planked over steamed frames.

Alternative construction: Cold-molded or strip.

Lofting is required.

Plans include 5...

Goeller 12' Dinghy

Designer: 
Frederick Goeller
Skill Level to Build: 
Intermediate

Round-bottomed, transom stern, centerboard, 2-4 daysailing.

Contruction: Carvel planked over steamed frames

Alternative contruction: Lapstrake, strip or cold-molded

Lofting is required

Plans include 3 sheets

Mill Creek 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.