Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

Whilly Tern

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Construction - Glued lapstrake clinker plywood.

No Lofting required.

Plans include 5 sheets with instructions.

Sail Area - Lug 83 sq. ft.

Sloop 95 sq. ft.

START 60

Designer: 
ACDesign
Skill Level to Build: 
beginner

The project, despite its small size, develops a discrete internal volume allowing to nr. 4 crew members to spend short cruises with good speed and pleasant navigation.

The hull lines and the deck are to corner for simplicity of...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

Pulsar 36

Designer: 
Erik Lerouge
Skill Level to Build: 
Medium

A trimaran is a good choice for those who want to get very high performance on a cruising boat.
The flared main hull offers nice cruising accommodation with two large double cabins, a convenient dinette, standing headroom at the galley,...

COASTWORKER 25

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Coastworker 25 Plans and patterns available for building in either Steel, Aluminum, Fiberglass or Wood Epoxy

ROBERTS CAT 470

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

CAT POWER SAILERS ( PS )

A CAT Power Sailer is a power cat capable of 12 to 30 knots under power and 12 to 18 knots under sail.

These catamarans were designed to be built using the fibreglass panel

25' Dark Harbor 17 1/2

Designer: 
B.B. Crowninshield
Skill Level to Build: 
Advanced

25′ LOA carvel-planked daysailer with small cabin.

Construction: Carvel planked over steamed frames.

Alternative construction: Cold-molded or strip.

Lofting is required.

Plans include 4 sheets.

Vik 165

Designer: 
Erik Lerouge
Skill Level to Build: 
Medium

Vik 165 is derived from the famous Petter 55 reputed as the fastest cruising catamaran on the market having achieved 8,3 knots in 6 knots of true wind at her first trials and easily won her first races in elapsed time!

Two ways of building...