Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

Alden 21' Indian Class

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

ROBERTS 345

Designer: 
BRUCE ROBERTS-GOODSON

Roberts 345 - MC steel or aluminum, R/C Steel, Fiberglass, Wood Epoxy Originally this was designed for lightweight frameless multi-chine steel construction and met with such success that, due to dem

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

Skerry

Designer: 
John C. Harris
Skill Level to Build: 
Intermediate

Our Skerry™ is that rare boat combining excellent rowing and sailing qualities into one attractive craft. Sail when there's wind, row when there's not. You'll cover the miles either way.

28' Canoe Yawl, Rozinante

Designer: 
L.F. Herreshoff / Modifications by Doug Hylan
Skill Level to Build: 
Advanced

This hypnotically striking canoe yawl ranks among the most admired designs of our time.

Construction: Carvel-planked over steam-bent frames

Alternative construction: Cold-molded

Lofting is required

Plans include 9...

21' Pretty Marsh Runabout

Designer: 
Doug Hylan
Skill Level to Build: 
Intermediate to Advanced

21′ 2″ Inboard/outboard runabout, built of marine plywood.

Several design options include center console, outboard as well as inboard/outboard.

And, configurations also include different heights for the windshield.

...

Ashes Solo Day

Designer: 
Trevor Paetkau - Ashes Still Water Boats
Skill Level to Build: 
Suitable for amateur builders

The Solo Day is simple. She’s light, easily carried, and not for the fussy. Best results will be obtained if the builder can curtail the urge to use fancy marquetry, or exotic woods. Built as designed she will weigh as little as 30 pounds, will...