Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

START 80

Designer: 
ACDesign
Skill Level to Build: 
intermediate

This boat, with a LOA of 8 mt,develops an internal volume such as to allow 6 crew members a sailing cruise.

The hull lines and deck lines are to corner for simplicity of construction, and are harmonized with the hull volume. The interior...

Duo

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a...

Skerry

Designer: 
John C. Harris
Skill Level to Build: 
Intermediate

Our Skerry™ is that rare boat combining excellent rowing and sailing qualities into one attractive craft. Sail when there's wind, row when there's not. You'll cover the miles either way.

Sassafras 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

16' 6" Resolute

Designer: 
Steve Killing
Skill Level to Build: 
novice

Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

22'6 Kingfisher Shell

Designer: 
Graeme King
Skill Level to Build: 
Intermediate

V-bottomed single shell with sliding seat, outriggers and light plywood construction.

Construction: Plywood planking over bulkhead-type frames.

No lofting is required.

Plans include 4 sheets.

Eastport Pram

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

It rows, it tows and it sails; it's a convenient 7' 9" long and easy on the eyes; and it's a wonderful kit to build, taking a novice only 40-50 hours to assemble plus a little more for finishing.