Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...

Digger 17

Designer: 
Paul (PAR) Riccelli
Skill Level to Build: 
novice

Digger 17 is a classic form of flats skiff, seen working along every shore. Designed for modest power, she can get into the shallowest water and carry a hefty load.

16' Quattro Catamaran

Designer: 
Richard and Lilian Woods
Skill Level to Build: 
Basic

High performance beach cat which is striking to look at and exciting to sail. Well-detailed plans of simple and rugged stitch-and-glue plywood hulls.

Construction: Stitch-and-glue plywood over bulkhead frames.

No lofting is required...

Sea Island Sport

Designer: 
Nick Schade
Skill Level to Build: 
Beginner/Intermediate

The Sea Island Sport is CLC’s response to hundreds of requests for an attractive stitch-and-glue sit-on-top kayak. Credit for the design goes to Nick Schade.

Spike Skiff 12' 3"

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Please note: this design was formerly known as Pike.

Construction - Glue-lap-plywood flat bottom.

Alternative construction - Traditional plank.

No Lofting required.

Plans include 3 sheets with instructions.

Sail...

Kahuna

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

32' Bermudan or gaff-rigged cutter for construction in wood and epoxy

15' 3" / 16' 2" Freedom Solo

Designer: 
Steve Killing
Skill Level to Build: 
novice

Freedom 15′3″ or 16′2″ — modern efficient pleasure canoe. The Freedom Solo is the result of a unique project initiated in the spring of 2006. Steve Killing had been considering a new solo tripping canoe design and, coincidentally, discussions on...