Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

20' Bangor Packet

Designer: 
Joel White
Skill Level to Build: 
Advanced

Lightweight, reasonably seaworthy recreational single with a sliding seat and outriggers.

Construction: Cold molded

Lofting is required

Plans include 5 sheets.

Sea Bright 38

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Parker Marine Enterprises—Sea Bright 38
Length Over All: 37′ 11”
Beam: 10′ 6″
Draft: 2′ 4″
Displacement: 9,500 lbs, half-laden (approximate)
Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)
Water: 200 gallons
Fuel...

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

Pixie 14 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
basic beginner

The 14ft PIXIE is an entry level car toppable beach cat that has proved extremely popular, with hundreds now sold worldwide. It has often been built by Scout groups or as school projects. WoodenBoat Store markets this design. The PIXIE hulls are...

SANPIERA

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

SANPIERA is a re-elaborated version of the Sanpierota, a traditional boat of the Venetian lagoon which shows many particular and interesting features.

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

NAVCAT CANAL

Designer: 
Naviculus
Skill Level to Build: 
medium

A series of Catamaran Houseboats/canal boats has been designed with electric propulsion.

The boats have been designed to meet dimensional restrictions of the french canal waterways, however the design can be easily adapted to other inland...