Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

854 results for All Boat Plans & Kits

13' 4" Melonseed skiff

Designer: 
Marc Barto
Skill Level to Build: 
Intermediate

Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.

Construction: Lapstrake plywood planking over steam-bent frames.

Alternative construction: Cold-molded or...

Orca 21

Designer: 
Evan Gatehouse
Skill Level to Build: 
Beginner

A serious extended expedition touring kayak, double or triple, designed to carry a large load safely and with ample stability.

Guillemot

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.

Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

Sharpie 24 Hampton Flattie

Designer: 
Reuel B. Parker
Skill Level to Build: 
Low to Moderate

24′ Chesapeake Bay Hampton Flattie

L.O.A.: 24′ 2″
L.W.L.: 22′ 8″
Beam: 7′ 9″
Draft: 2′ ½″/3′ 9″
Sail Area: 263 sq ft
Weight: 2,500# (approx)

Proportionately, this is the largest sharpie type known, and...

Zipper

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.

This design differs from those of the period in that it is to be constructed in the 'Instant Boat'...

Cooper Jr. - RYD-22.11

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced, because of size

Copper Jr. is a extended cabin V bottom power cruiser. Her general qualities permit very economical cruising in comfort with modest power requirements. Taped seam, plywood construction.

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using...

Optimist Dinghy Template Plans

Designer: 
Clark Mills
Skill Level to Build: 
Beginner/Intermediate

If you are considering building a wood-epoxi Optimist dinghy, you will definitely need our Optimist Dinghy Template Plans.

The Optimist Dinghy Template Plans not only contain the description and dimensions of each and every part, all...

Navigator

Designer: 
John Welsford
Skill Level to Build: 
Some woodworking skills helpful

Classic daysailing yacht of glued plywood lapstrake construction suitable for first time builders. Choice of sloop, yawl or lugsail rigs, carries up to six and is suitable for coastal cruising.