Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

826 results for All Boat Plans & Kits

Thomson 11' Skiff

Designer: 
Asa Thomson
Skill Level to Build: 
Intermediate

Flat-bottomed rowing skiff elegant enough for a yacht tender.

Construction: Cross-planked bottom, lapstrake sides

No lofting is required

Plans include 1 sheet.

Papoose

Designer: 
Warren Jordan
Skill Level to Build: 
Beginner

This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length....

TRAWLER YACHT 43 KIT

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Trawler Yacht 43 STEEL KIT or PLANS & CUTTING FILES Trawler Yacht 470 FIBERGLASS PLANS & FSP

These trawlers are designed in accordance with Lloyds for category 1 (unrestricted operating /

Scherzando

Designer: 
Bosco Plana

Scherzando is a 12'10'' open canoe. The construction technique is a wooden basquet whith a canvas skin coated with epoxy or polyester. The plans include 7 station moulds, bow and stem at full escale.

Abaco 23

Designer: 
Jacques Mertens
Skill Level to Build: 
experience

Classic sport fishing boat in the style of the Abaco boats. A classic, smooth riding, variable deadrise hull finishing with 17 degrees deadrise at the transom.

Zimmer 21' Gaff Sloop

Designer: 
Nelson Zimmer
Skill Level to Build: 
Intermediate to Advanced

Centerboard sloop with inside ballast and two settee berths for coastal cruising.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip.

Lofting is required.

Plans include 5 sheets.

Skerrieskiff 17'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued Lapstrake clinker plywood.

No Lofting required.

Plans include 5 sheets with instructions.

Sail Area - 67 sq. ft.

Babson 14

Designer: 
Tom Hill and Jon Wilson
Skill Level to Build: 
Advanced

Build the Babson 14 from scratch!

Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.

Plans contain 16 sheets of drawings, full-sized mold...

ROBERTS 31

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts 31 - Fiberglass construction. Over 100 of this design have been built in various part of the world. Several have made trans ocean voyages.