Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Skana

Designer: 
Orca Canoes & Kayaks Ltd.
Skill Level to Build: 
novice

Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.

KIS 4.2S

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders. Since they often find themselves in trouble in building masts, sails and rig of their boats and are likely to spend in these items much more than what they...

Tricky Five

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it...

Milford 20

Designer: 
Neville Watkinson & Mark Fitzgerald
Skill Level to Build: 
Intermediate

The Milford 20 is a trailer-able shoal draft sharpie schooner modelled on the New Haven sharpies of the late 19th. century. It was inspired by Mark Fitzgerald’s FLORIDAYS design, as published in Reuel Parker’s Sharpie Book and featured in...

Janus sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
beginner

Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good...

RoofRack

Designer: 
John Welsford
Skill Level to Build: 
Beginner

A small and very simple tender to fit inside a station wagon or on a roofrack, this little plywood dink will suit some one wanting a tender for their small yacht or motorboat.

Williams 24' Gaff Yawl

Designer: 
Fenwick C. Williams
Skill Level to Build: 
Advanced

A simple, spacious, singlehanded cruiser designed for carvel construction. Construction: Carvel planked over steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 7 sheets

16' Gentleman's Runabout

Designer: 
Nelson Zimmer & John Hacker
Skill Level to Build: 
Advanced

A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.

Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.

Please note:...

Lone Star Twelve Rowboat

Designer: 
victory studios
Skill Level to Build: 
moderate

Lone Star Twelve rowboat, built using traditional methods, but with marine plywood for a leak free low maintenance hull. No lofting required. Includes measurements for station molds, transom, construction details and full size stem pattern....