Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

Duo

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a...

START 65

Designer: 
ACDesign
Skill Level to Build: 
beginner

This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.

The construction method is the “stitch and paste” because of its small size.

The hull is in CPM...

Volare Utility

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.

Her length is that of two sheets of 8′ plywood and she’s built in two halves (...

Murphy - RYD-16.2

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
handy novice

RYD-16.2 is a wholesome dayboat that can be rigged as a free standing cat or sloop. Large, roomy cockpit, taped seam construction, centerboard and kick-up rudder.

PIXIE, Beach Catamaran

Designer: 
Richard & Lilian Woods
Skill Level to Build: 
Basic

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

BRIO 555

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

The BRIO 555 is a fast and easy to handle boat, suitable to be sailed sportively by a crew of two or quietly and safely by a larger crew.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...