Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

PRAM 220

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

BABY BAGGIE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
advanced

BABY BAGGIE is quite long and difficult to build for its size (10 Foot) but has been designed mainly to satisfy the desire of having a small elegant boat.

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...