Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

854 results for All Boat Plans & Kits

K-5m

Designer: 
Paul Kotzebue
Skill Level to Build: 
Intermediate to Advanced

28 ft full displacement sailboat. Strip planked double ender patterned after the design's of Nick Potter and L. Francis Herreshoff of the 1920's and 1930's.

12' WEE ROB Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to intermediate

Light, elegant double-paddle canoe for glued-seam lapstrake construction.

Can be built 12′, 13′ 7″, or 15′ 2″ from the same set of plans.

Construction: Glued lapstrake plywood.

Alternative construction: Traditional...

17' 9" Freedom

Designer: 
Steve Killing
Skill Level to Build: 
novice

The Freedom series has gained back the turning ability found in traditional canoe shapes, without sacrificing the speed of the modern hull

Pax 18

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.

Luxemotor40

Designer: 
Nick Branson
Skill Level to Build: 
Moderate

The Luxemotor class is available at 40ft. A real little ship combining lots of accommodation within a small size. Easy of handling, lower running costs and reduced initial outlay are some of the benefits to this new design.

The design...

26' Sloop PILOT

Designer: 
George Stadel
Skill Level to Build: 
Advanced

A comfortable small cruising boat with berths for either two or four and an alternate schooner rig.

Construction: Carvel planking over steamed frames

Lofting is required.

Plans include 10 sheets.

Goeller 12' Dinghy

Designer: 
Frederick Goeller
Skill Level to Build: 
Intermediate

Round-bottomed, transom stern, centerboard, 2-4 daysailing.

Contruction: Carvel planked over steamed frames

Alternative contruction: Lapstrake, strip or cold-molded

Lofting is required

Plans include 3 sheets

Silver 333

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing. The bow of the boat acts as...

Zipper

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.

This design differs from those of the period in that it is to be constructed in the 'Instant Boat'...