Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

854 results for All Boat Plans & Kits

Chesapeake Triple

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The success of the proven Chesapeake™ hull shape led quickly to demands for similar three-person designs. With a 700lbs payload and surprising speed.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

20' 3" Sloop LITTLE GULL

Designer: 
Winthrop Warner
Skill Level to Build: 
Advanced

Round-bottomed pocket cruiser with room for an inboard auxiliary and accommodations for two.

Construction: Carvel planked over steamed frames.

Alternative construction: Cold-molded or strip

Lofting is required.

Plans...

Peace Canoe

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

A great family boatbuilding project! Build it in a weekend from a kit, or build it from plans using local materials.

Fantail Launch, by Bolger

Designer: 
Philip C. Bolger
Skill Level to Build: 
Advanced

This exquisite launch leaves little wake at five knots. Her plans show both cold-molded and plank-on-frame construction. Construction: Cold-Molded or Carvel planked over steamed frames. Alternative construction: Lapstrake. Lofting is required....

Y-DS 650

Designer: 
Carsten Weber
Skill Level to Build: 
semi skilled

day- weekendsailer for coastal cruising in radial chine plywood construction

23' Double Ended Sloop

Designer: 
Joel White
Skill Level to Build: 
Advanced

Speed, good looks, and comfortable seating were the designer's main criteria for this double-ended centerboard daysailer.

Construction: Cold-molded over strip-planked inner skin.

Alternative construction: Strip, carvel planked...

Seagull

Designer: 
John Welsford
Skill Level to Build: 
Very simple

Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!