Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

12' Catspaw Dinghy

Designer: 
Joel White and N.G. Herreshoff
Skill Level to Build: 
Intermediate

An open boat that rows with ease and swiftness and is stiff enough under sail to stand up to a breeze.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake or strip

No lofting is required...

Kahuna Nui

Designer: 
Mark Smaalders
Skill Level to Build: 
Advanced

Kahuna Nui is intended for extended offshore cruising and living aboard. She is available as a sailing auxiliary or as a motorsailer with an enclosed pilothouse. She has a canoe hull for ease of construction, with a full keel for strength and...

START 80

Designer: 
ACDesign
Skill Level to Build: 
intermediate

This boat, with a LOA of 8 mt,develops an internal volume such as to allow 6 crew members a sailing cruise.

The hull lines and deck lines are to corner for simplicity of construction, and are harmonized with the hull volume. The interior...

22'6 Kingfisher Shell

Designer: 
Graeme King
Skill Level to Build: 
Intermediate

V-bottomed single shell with sliding seat, outriggers and light plywood construction.

Construction: Plywood planking over bulkhead-type frames.

No lofting is required.

Plans include 4 sheets.

BLITZ 420

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The Blitz420 sportive dinghy. The sleek lines and narrow hull makes it fast and fun, especially with weak and medium winds. The boat offers a great stability using the two outer wings, both as a springboard for the balance of the boat in...

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

T*Boat

Designer: 
Larry Burnett
Skill Level to Build: 
Modest woodworking skills

What your viewing is a T*Boat. This particular version is the T*5 (fifth generation). The T*6 version is presently under development and due to be in the marketplace as a Kit-built boat around the 1st of the year.

All T*Boats are...