Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.

Janus sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
beginner

Janus is a 4 berth trailable sailing catamaran built in sheet plywood. However, don’t be deceived by Janus’ simple dory shaped hulls (which make it a very easy boat to build). It has a lot of internal room for its length and a surprisingly good...

Milford 20

Designer: 
Neville Watkinson & Mark Fitzgerald
Skill Level to Build: 
Intermediate

The Milford 20 is a trailer-able shoal draft sharpie schooner modelled on the New Haven sharpies of the late 19th. century. It was inspired by Mark Fitzgerald’s FLORIDAYS design, as published in Reuel Parker’s Sharpie Book and featured in...

Lion 800

Designer: 
Unik Yachts

New Lion 800 is a continuation of a series of plywood yacht designed by the company Unik Yachts.

The main idea of a series of yachts Lion is to maximize the manufacturability of the design and the ability to self-built yacht from a kit of...

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
amateur

Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made,...

Workstar 17 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Basic

The Workstar 17 Workboat is an epoxy and plywood small garvey workboat, kit-built using the Prefix CAD/CAM System® of design and construction: designed by Rob Humphreys Yacht Design and put into production by Working Boats UK Ltd in the early...

Coot

Designer: 
Nick Schade
Skill Level to Build: 
easy

The Coot is a handy little yacht tender with a lot of capacity. The “pram” style design has transoms at boat ends, this provides a lot of capacity in a short length and has the added benefit for the first-time wooden boat...

JAM 8

Designer: 
Edward Sutt
Skill Level to Build: 
Beginner

The JAM 8 is a true personal watercraft. While only 7 foot 4 inches long, it can carry up to 200 pounds. The JAM 8 is perfect for exploring flat water rivers, ponds and marshes.