Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

854 results for All Boat Plans & Kits

GOZZO 400

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

The “gozzo” is a traditional Italian fishing boat still very popular. With a length of 4 m our GOZZO 400 has the minimum size which allows to maintain all the advantages connected to this type of

13' Sailing Peapod

Designer: 
Doug Hylan
Skill Level to Build: 
Basic to Intermediate

A most elegant lapstrake, plywood peapod for oar and sail.

Full-sized mold patterns are included.

Construction: Glued-lapstrake plywood.

Alternative construction: Traditional lapstrake.

No lofting is required.

...

19' 6" Caledonia Yawl

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Derived from traditional Norwegian small craft, this handsome double-ender performs as well as a daysailer and beach cruiser.

Clean, frameless, glued-lapstrake plywood hull means, easy construction, happy trailering, and low maintenance...

Mini Skeeter Iceboat

Designer: 
John Eisenlohr
Skill Level to Build: 
medium

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82...

Talon 16' by Anders Boats

Designer: 
Tim Anders
Skill Level to Build: 
Amateur

This 16 Talon is designed to give you more boat for less dollars! You will smile zooming over choppy waters with its smooth riding hull.

All simple stitch and glue techniques make this plans build boat fun and easy to construct. Its...

NEREIDE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

NEREIDE is the classical canoe used on lakes or rivers of North America. For the last two centuries it has been built with very slight differences in shape, which is in itself a guarantee of quality.

VOYAGER DS 655

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

VOYAGER DS 655 WOOD / EPOXY, Fiberglass or Steel.

The cockpit extends from inside the 'dog house' with 5 ft sitting headroom though to near the transom as shown. Engine is under the dog house.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...