Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Sail Kit for kayaks

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.

It’s designed with two variants: one adaptable to Naiade and Ondina (version A), and the other...

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class.

The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup.
As the down-scaling would leave the boat with to little righting moment...

VOYAGER DS 655

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

VOYAGER DS 655 WOOD / EPOXY, Fiberglass or Steel.

The cockpit extends from inside the 'dog house' with 5 ft sitting headroom though to near the transom as shown. Engine is under the dog house.

ONDINA

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

ONDINA is a kayak designed with little compromise and destined to those who wish to experience long excursions at sea, it is pleasant to row, stable and, above all, fast.

ROBERTS CAT 470

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

CAT POWER SAILERS ( PS )

A CAT Power Sailer is a power cat capable of 12 to 30 knots under power and 12 to 18 knots under sail.

These catamarans were designed to be built using the fibreglass panel

Pax 18

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped