Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

PIXIE, Beach Catamaran

Designer: 
Richard & Lilian Woods
Skill Level to Build: 
Basic

A fast daysailer of stitch-and-glue plywood construction. Dismantles for cartopping. Deep V-hulls, no centerboard. Construction: Stitch-and-glue plywood over bulkhead frames. No lofting required. Plans include 3 sheets.

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Malabar II

Designer: 
John Alden
Skill Level to Build: 
advanced

An oceangoing auxiliary cruiser featuring stout but simple carvel construction.

Construction: Carvel planked over steamed frames

Lofting is required

Plans include 5 sheets.

BLUEMOTION 550

Designer: 
Keith Callaghan
Skill Level to Build: 
Moderate

BlueMotion is a new 5.5m dayboat (or large dinghy) design for 2013. The design is a direct derivative of my Hazardous Zero-9 Merlin Rocket design, and has sufficient horsepower to provide a superb sailing experience, but with the reassurance...

13'0 Rob Roy

Designer: 
Ted Moores
Skill Level to Build: 
novice

A classic double paddle solo canoe. This hull design has been built in many versions, from a simple light weight fast cruising canoe, to a full decked version of bookmatched walnut veneer.

Hyak

Designer: 
Orca Canoes & Kayaks Ltd.
Skill Level to Build: 
novice

Hyak is a single kayak designed for multi-day excursions and recreational racing.

18' Catboat

Designer: 
Fenwick Williams
Skill Level to Build: 
Advanced

Construction: Carvel planked over sawn & steamed frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 11 sheets.

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...

Y-DS 650

Designer: 
Carsten Weber
Skill Level to Build: 
semi skilled

day- weekendsailer for coastal cruising in radial chine plywood construction