Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

TRAWLER YACHT 43 KIT

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Trawler Yacht 43 STEEL KIT or PLANS & CUTTING FILES Trawler Yacht 470 FIBERGLASS PLANS & FSP

These trawlers are designed in accordance with Lloyds for category 1 (unrestricted operating /

Lion 600

Designer: 
Unik Yachts

600 Lion Yacht project despite its small size, has a spacious interior, and allows you to comfortably make trips to the inland waters and coastal seas.

The yacht can be easily transported on a trailer behind a car, and it opens up the...

25' Bassboat

Designer: 
Eldredge-McInnis
Skill Level to Build: 
Advanced

Safe, dry, fast, and seaworthy V-bottomed inboard powerboat designed for carvel planking.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip

Lofting is required.

Propulsion: 6 cylinder 350...

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

28' Canoe Yawl, Rozinante

Designer: 
L.F. Herreshoff / Modifications by Doug Hylan
Skill Level to Build: 
Advanced

This hypnotically striking canoe yawl ranks among the most admired designs of our time.

Construction: Carvel-planked over steam-bent frames

Alternative construction: Cold-molded

Lofting is required

Plans include 9...

13'0 Rob Roy

Designer: 
Ted Moores
Skill Level to Build: 
novice

A classic double paddle solo canoe. This hull design has been built in many versions, from a simple light weight fast cruising canoe, to a full decked version of bookmatched walnut veneer.

Shellback Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

Ashes Solo Day

Designer: 
Trevor Paetkau - Ashes Still Water Boats
Skill Level to Build: 
Suitable for amateur builders

The Solo Day is simple. She’s light, easily carried, and not for the fussy. Best results will be obtained if the builder can curtail the urge to use fancy marquetry, or exotic woods. Built as designed she will weigh as little as 30 pounds, will...

Kitty Hawk 26

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Kitty Hawk 26 is a cold-molded, Carolina Style center console. Powered by a single four stroke outboard, she will be an economical offshore fishing boat.