Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Pretty Marsh

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate to advanced

Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class.

The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup.
As the down-scaling would leave the boat with to little righting moment...

Half Model Plan SHADOW

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Compromise sloop designed by N.G. Herreshoff in 1871. The plans produce a model that is 19″ long. When you purchase the set of plans, you also receive instructions on building by the "lift" method, as well as a bit of historical information on...

Rustica 570

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

Rustica 570 is a cabin motor boat ideal for coastal cruising and camping. It’s particularly suitable for river tourism in protected waters. The shallow V hull, semi-displacement, is designed for an outboard motor hosted inside the cockpit with a...

RoofRack

Designer: 
John Welsford
Skill Level to Build: 
Beginner

A small and very simple tender to fit inside a station wagon or on a roofrack, this little plywood dink will suit some one wanting a tender for their small yacht or motorboat.

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

Hanze Yawl

Designer: 
Bert van Baar/Pepijn van Schaick
Skill Level to Build: 
intermediate

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.

Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the...

14' 10" Runabout, RASCAL

Designer: 
Ken Bassett
Skill Level to Build: 
Intermediate to Advanced

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.