Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Day - Mower 25' Sea Bird Yawl

Designer: 
T.F. Day and C.D. Mower
Skill Level to Build: 
Intermediate to Advanced

Oceangoing carvel-planked cruiser with a choice of centerboard or ballast keel configurations.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip.

Lofting is required.

Plans include 7 sheets...

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been...

Sea Kayak SEGUIN

Designer: 
Rob Bryan
Skill Level to Build: 
Basic to Intermediate

Fast and slim, Seguin’s 21 1/2″ beam will challenge and reward experienced paddlers.

Built of 4mm plywood, this hard-chined, stitch-and-glue sea kayak includes a retractable skeg that will provide balance and control.

...

20' Spalding Utility Launch

Designer: 
Eliot Spalding
Skill Level to Build: 
Intermediate to Advanced

Rugged little launch with generous beam.

Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.

Construction: Strip-planked over steam-bent frames...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...