Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

Penny Fee

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake plywood.

Alternative construction - Traditional, cold-molded and strip plank.

No Lofting required.

Plans include 8 sheets.

Sail Area - Lug 87 sq. ft.

Sloop 104 sq. ft.

Yawl...

13' 9" Willy Winship

Designer: 
John Atkin
Skill Level to Build: 
Basic to Intermediate

Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.

Construction: Cross-planked bottom, lapstrake sides

Alternative constuction: Plywood, glued lapstrake plywood

Lofting is required

...

37' 3" Yawl, Controversy 36

Designer: 
Mt. Desrt Yacht Yard
Skill Level to Build: 
Advanced

Designed for strip-planking, the Controversy 36 features light displacement and good headroom, with light and open space throughout.

Construction: Strip-planked over bulkheads and frames

Lofting is required.

Plans include 16...

Switzer Bullet 136

Designer: 
Switzer-Craft - Classic Wooden Boat Plans
Skill Level to Build: 
Beginer

Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.

A low riding speedster able in calm or rough water. This is our only reverse engineered plan due to a factory fire...

NAVCAT RIVER FERRY

Designer: 
Naviculus
Skill Level to Build: 
medium

A small river ferry has been designed to transfer up to 60 passengers.

The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.

The design is using the torqeedo electric motor concept...

Half Model Plan NYMPH

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.

The plans produce a model that is 25″ long.

You’ll receive 4 pages of plans historical information about the boat and step-by-...

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...