Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Workstar 640 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Advanced - welding skills in aluminium

An update of the traditional garvey, the Workstar 640 is a capable and proven small workboat, all-welded construction from marine aluminium alloy and extrusions. The Workstar 640 was designed by Rob Humphreys Yacht Design and put into production...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

Tolman Skiff Widebody

Designer: 
Renn Tolman
Skill Level to Build: 
beginner - intermediate

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or...

Sassafras 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

JAM 8

Designer: 
Edward Sutt
Skill Level to Build: 
Beginner

The JAM 8 is a true personal watercraft. While only 7 foot 4 inches long, it can carry up to 200 pounds. The JAM 8 is perfect for exploring flat water rivers, ponds and marshes.

Deep V Inboard - Donzi Inspired

Designer: 
Classic Wooden Boat Plans
Skill Level to Build: 
Begginer

Based on the Donzi Sweet 16, this little treasure boasts a generous deep V at the transom allowing for smoother running and bad weather handling. Available as an outboard and inboard it an easily tow-able boat that will bring you home and take...

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...