Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Pulsar 33

Designer: 
Erik Lerouge

A trimaran is an interesting answer to the problems of a small offshore cruising multihull.

The flared main hull has accommodation similar to a monohull with a real double cabin, dinette, standing headroom at the galley, toilets and...

Pretty Marsh

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate to advanced

Good performance with modest horsepower, a soft and predictable ride. I/O or outboard, 80-200hp.

Shearwater Sectional Sport

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

Developed by Chesapeake Light Craft, LLC, with designer Eric Schade, the 14′6″ Shearwater Sectional is a performance-oriented kayak that successfully bridges the gap between high performance, comfort, and stability. Spin loose five bolts at the...

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

Nymph

Designer: 
Nick Schade
Skill Level to Build: 
easy

Lightweight strip-planked solo double-paddle canoe

Floom, RYD-29.6

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced because of size

Floom (RYD-29.6) is one in a series of river/houseboat designs. This version is available in two widths, 7' and 9'. The V bottom hull propels very easily, doesn't slap and is quite stable.

Workstar 17 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Basic

The Workstar 17 Workboat is an epoxy and plywood small garvey workboat, kit-built using the Prefix CAD/CAM System® of design and construction: designed by Rob Humphreys Yacht Design and put into production by Working Boats UK Ltd in the early...

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...