Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

17’ Kayak, Endeavor

Designer: 
Steve Killing
Skill Level to Build: 
Intermediate

Steve Killing’s design is fast becoming well-known, in part due to the Endeavour being build in many a WoodenBoat School class, as well as being the featured boat in the Ted Moores book Kayakcraft.

This is the boat for you, even if you...

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

Long Lake

Designer: 
Dave Kuperstein
Skill Level to Build: 
beginner

Light and fast, a 20' tortured plywood, decked dayboat: both a double kayak and a single scull in one hull. Her 'midship' section is similar to Aleut kayaks.

COASTWORKER 25

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Coastworker 25 Plans and patterns available for building in either Steel, Aluminum, Fiberglass or Wood Epoxy

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...