Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

833 results for All Boat Plans & Kits

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.

Coot

Designer: 
Nick Schade
Skill Level to Build: 
easy

The Coot is a handy little yacht tender with a lot of capacity. The “pram” style design has transoms at boat ends, this provides a lot of capacity in a short length and has the added benefit for the first-time wooden boat...

9' 6" Nutshell Saling Kit

Designer: 
Joel White
Skill Level to Build: 
Oars, sail, small outboard

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,...

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

Alden 21' Indian Class

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.

MIA

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

MIA is a 12 foot runabout, Her design is inspired by William Jackson's 1955 design for the 'Ace' which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com).

This design differs from those of the period in that it...

ROBERTS 341

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts 341 (CANOE STERN) Fiberglass plans and frame patterns Over 100 of this fine cruising sailboat are in service world-wide. Designed for those of you that are looking for the sea going qualities

Romany 34 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
moderate

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests. However the hulls are much larger and...

Design 077

Designer: 
George Whisstock
Skill Level to Build: 
Well organized beginner

The baby of our pocket cruiser range, Design 077 is a remarkably robust and sea-kindly small cruising sail boat. Available as a gaff yawl or gunter rig cutter.

She is very straightforward to build on five ring frames and a backbone,...