Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

17' 9" Freedom

Designer: 
Steve Killing
Skill Level to Build: 
novice

The Freedom series has gained back the turning ability found in traditional canoe shapes, without sacrificing the speed of the modern hull

21' Runabout

Designer: 
Colin Wood
Skill Level to Build: 
Moderate

When I first saw WoodenBoat Magazine’s boat design competition to design a modern wooden runabout, I was very excited. I’m sure most of the other competitors in this competition feel the same way. The big mahogany runabouts of...

Navcat Camper

Designer: 
NAVICULUS
Skill Level to Build: 
medium

Naviculus has teamed up with well known Australian Camper supplier Trayon to provide the camping experience on a boat. The boat is a simple open deck catamaran of wooden construction and with Torqeedo electric propulsion. The trayon camper can...

Yankee Tender

Designer: 
WoodenBoat
Skill Level to Build: 
Basic

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.

13' 9" Willy Winship

Designer: 
John Atkin
Skill Level to Build: 
Basic to Intermediate

Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.

Construction: Cross-planked bottom, lapstrake sides

Alternative constuction: Plywood, glued lapstrake plywood

Lofting is required

...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...