Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

GulfStream 28

Designer: 
Jacques Mertens
Skill Level to Build: 
some experience

The GulfStream 28 is a moderate vee, relatively narrow boat (beam/length ratio of 3.4) designed to satisfy a program in which economy and seaworthiness were top priorities.

PALOMA OPEN

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

PALOMA is a simple, traditional and versatile boat which has been designed in three versions, as a small cruiser, as an open daysailer and as a motorboat.

Vik 165

Designer: 
Erik Lerouge
Skill Level to Build: 
Medium

Vik 165 is derived from the famous Petter 55 reputed as the fastest cruising catamaran on the market having achieved 8,3 knots in 6 knots of true wind at her first trials and easily won her first races in elapsed time!

Two ways of building...

16' Perfect Skiff –Weld

Designer: 
Stephen Weld
Skill Level to Build: 
Intermediate to Advanced

The flat-bottomed skiff can be both the most and least refined craft afloat.

Popular by their ease of construction.

Construction: Plywood planking over bulkhead frames.

Alternative construction: Cross-planked bottom,...

ROBERTS 470

Designer: 
BRUCE ROBERTS-GOODSON

ROBERTS 470 - WOOD EPOXY The accommodation of this design has been laid out to suit two couples. The Roberts 470 makes a fine long distance cruising yacht.

Merry Wherry Two

Designer: 
Ron Mueller
Skill Level to Build: 
Beginner

Designed For Capacity The Merry Two is the versatile Merry - row with a partner, take a friend as a passenger, or row by yourself - perfect for the larger rower. Or tour as Matt Kirchoff did with his son, on a one month trip exploring the outer...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...