Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

834 results for All Boat Plans & Kits

Spike Skiff 12' 3"

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Please note: this design was formerly known as Pike.

Construction - Glue-lap-plywood flat bottom.

Alternative construction - Traditional plank.

No Lofting required.

Plans include 3 sheets with instructions.

Sail...

20' Yawl, SALLEE ROVER

Designer: 
Samuel S. Crocker
Skill Level to Build: 
Advanced

A handy clipper-bowed centerboard yawl, this boat is a heavily built, smart sailor with sparten accommodations for two.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting...

KIS 4.2S

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders. Since they often find themselves in trouble in building masts, sails and rig of their boats and are likely to spend in these items much more than what they...

29' Gartside Cutter

Designer: 
Paul Gartside
Skill Level to Build: 
Advanced

Displacing more than 18,000 lbs, this is a big 29′ boat. She has a set of lines you can fall in love with. Construction: Carvel-planked over laminated frames. Alternative construction: Cold-molded or strip. Lofting is required. Plans include 5...

Fisherman 17

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

17′ CENTER-CONSOLE FLATS FISHERMAN
L.O.A.: 16′ 10″
L.W.L.: 15′ 1″
BEAM: 6′ 5″
RAFT: 9 3/4″ Static, Laden
SUGGESTED POWER—25 to 75 HP

TYPE: Tropical and sub-tropical flats fisherman/guide boat, especially suited...

Pax 20

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Coot

Designer: 
Nick Schade
Skill Level to Build: 
easy

The Coot is a handy little yacht tender with a lot of capacity. The “pram” style design has transoms at boat ends, this provides a lot of capacity in a short length and has the added benefit for the first-time wooden boat...