Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Jericho Bay Lobster Skiff

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Designed by Joel White, the original boat was built plank-on-frame by Jimmy Steele (of Peapod fame), but no plans were ever drawn-until now.

Tom Hill and Eric Dow have taken lines off the original boat and Tom built the prototype and has...

Pulsar 33

Designer: 
Erik Lerouge

A trimaran is an interesting answer to the problems of a small offshore cruising multihull.

The flared main hull has accommodation similar to a monohull with a real double cabin, dinette, standing headroom at the galley, toilets and...

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

ROBERTS 64

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 64 - Steel or Aluminum or Fiberglass

This design was originally based on the very successful Roberts 53 and is assured of acceptance by those builders who require a larger boat.

22' Fox Island Class

Designer: 
Joel White
Skill Level to Build: 
Intermediate

This double-ended sloop combines genuine tradition and modern performance.

Construction: Glued-lapstrake plywood over laminated frames.

Lofting is required.

Plans include 4 sheets.

17’ Kayak, Endeavor

Designer: 
Steve Killing
Skill Level to Build: 
Intermediate

Steve Killing’s design is fast becoming well-known, in part due to the Endeavour being build in many a WoodenBoat School class, as well as being the featured boat in the Ted Moores book Kayakcraft.

This is the boat for you, even if you...

Design No. 165

Designer: 
George Whisstock
Skill Level to Build: 
Some experience preferable – CNC version needs less experience than laminated version

A development from our very successful and popular Design No. 119 (17′6″ Pocket Cruiser) – a 19′4″ Pocket Cruiser in two basic versions:

Saloon version: good sitting headroom.

Doghouse version: decent standing headroom in the...

Kahuna

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

32' Bermudan or gaff-rigged cutter for construction in wood and epoxy