Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

Zipper

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.

This design differs from those of the period in that it is to be constructed in the 'Instant Boat'...

Fafnir

Designer: 
John Welsford
Skill Level to Build: 
Basic Woodworking skills

Miniature voyaging and cruising yacht for amateur boatbuilders, can carry two, capable of short blue water voyages.

MicroCatboat

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The design of the boat comes by request of a customer who already owns a Charles W. Wittholz’s catboat and wanted to have a beautiful tender for his yacht. We designed, therefore, a small dinghy of only 2.6 meters with simple and elegant lines,...

Old Gaffer

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Moderate

18′ double ended, auxiliary daysailer. Gaff rigged sloop with large cockpit and small cudy forward. Traditional carvel construction with outboard rudder and ballast keel. Many boat built to this design over the years including some by amateur...

ROBERTS 36

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 36 - Multi Chine Steel plans and Full Size frame patterns. This design is a well proven world cruiser as over 300 are currently sailing in different parts of the world

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...