Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Pilot Schooner 28

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Swansea Pilot Schooner, flush-decked cruiser, based on the earliest type (late 18th/early 19th century). This vessel is intended for open ocean cruising.

Kalostyn

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Kalostyn was designed as the subject matter of a book that I had planned to write called, How to design a boat using SketchUp 3D software.

I created a design that had lots of curves in order to demonstrate how to put these...

Romany 34 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
moderate

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests. However the hulls are much larger and...

Penny Fee

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake plywood.

Alternative construction - Traditional, cold-molded and strip plank.

No Lofting required.

Plans include 8 sheets.

Sail Area - Lug 87 sq. ft.

Sloop 104 sq. ft.

Yawl...

DIAPASON 750

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

DIAPASON is a small cabin cruiser 7,50 m length. It is a modern, simple boat with racy lines, good performances and internal accommodations suitable for cruising.

Baby Tender

Designer: 
Warren Jordan
Skill Level to Build: 
Intermediate/Beginner

The cradle boat Baby Tender is an adaptation of the classic yacht tender carried aboard many of the finest yachts during the time when wooden boatbuilding was truly an art. The boat has a length of 45 in. and a beam of 22 in. Construction is...

Newport Runabout

Designer: 
Nelson Zimmer
Skill Level to Build: 
Advanced

This runabout reveals the influence of Zimmer’s association with John Hacker, and will require expert boatbuilders.

Construction: Batten-seam planking over sawn frames.

Lofting is required.

Plans include 4 sheets.

ROBERTS 370

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 370 Fiberglass - Steel - Wood / Epoxy Such has been the response to this design that plans for it's construction are available in steel, aluminum, FIBREGLASS and Wood Epoxy.