Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Tolman Skiff Widebody

Designer: 
Renn Tolman
Skill Level to Build: 
beginner - intermediate

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or...

ROBIN

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Basic

10′ x 3′8″ Double Ender Dinghy.

Designed for paddling, rowing or sailing and for construction in laminated wood or fiberglass.

Able to carry on car top as canoe or on boat deck as yacht tender.

Seats three and has two...

Volare Console

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

‘Volare’ comes in two versions. This is the console version, the utility version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.

Her length is that of two sheets of 8′ plywood and she’s built in two halves (...

Sea Kayak SEGUIN

Designer: 
Rob Bryan
Skill Level to Build: 
Basic to Intermediate

Fast and slim, Seguin’s 21 1/2″ beam will challenge and reward experienced paddlers.

Built of 4mm plywood, this hard-chined, stitch-and-glue sea kayak includes a retractable skeg that will provide balance and control.

...

Classic Delta 29'

Designer: 
P&F Yacht Design - Naval Architects
Skill Level to Build: 
Skilled

This retro styled powerboat was designed for weekend cruisers and fishing, her semi displacement hull offer seaworthy and sea kindly performance, good speeds with modest horsepowers.

Construction in Plywood/Epoxy. Plans are available in...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

ATHEY

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athey is a 15' open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 4, 6 and 9mm glued lapstrake plywood, she weighs just 65 pounds and is cartopped.